School lighting guide: classrooms, gyms, hallways, and grounds
Schools have almost every kind of space: classrooms, offices, gyms, cafeterias, kitchens, hallways, stairwells, libraries, locker rooms, parking lots, and athletic fields. Each has its own lighting needs. This guide walks through typical light levels and fixture choices for each area, plus controls, emergency lighting, and funding.

Classrooms
- Light level: about 30–50 foot-candles on desks.
- Fixtures: 2x4 or 2x2 LED troffers and flat panels in drop ceilings; architectural linear or strip lights in hard ceilings.
- Color temperature: 4000K is the usual choice; some schools use 3500K for a softer feel.
- Controls: occupancy or vacancy sensors and 0–10V dimming, especially for presentations. Many energy codes require sensors in classrooms. See 0–10V dimming and lighting controls.
- Glare: avoid bright fixtures directly over whiteboards and screens; dimming the front row helps for projection.
Hallways and stairwells
- Light level: about 10–20 foot-candles in corridors, slightly less in stairwells, with good uniformity.
- Fixtures: 1x4 or 2x2 panels, strip lights, or stairwell fixtures with sensors.
- Emergency lighting: required along exit paths; emergency drivers in hallway fixtures keep ceilings clean. See emergency lighting and exit sign basics and LED exit signs.

Gyms and multipurpose rooms
- Light level: about 30–50 foot-candles for recreation and PE, 50–80 for competition.
- Fixtures: UFO high bays or linear high bays with wire guards. See LED gym lights and the gym and church lighting guide.
- Controls: dimming for assemblies and events.
Cafeterias and kitchens
- Cafeterias: about 20–30 foot-candles; troffers or high bays depending on ceiling height.
- Kitchens: about 50–75 foot-candles; sealed vapor tight fixtures with shatterproof lenses. See commercial kitchen lighting.
Libraries, offices, and nurse's office
- Libraries: about 30–50 foot-candles on tables, with even light on shelves.
- Offices: see office lighting.
- Nurse's office: 4000K–5000K with good color rendering; see the healthcare lighting guide.
Locker rooms, restrooms, and storage
Use sealed or damp-rated fixtures in locker rooms and showers, and occupancy sensors in restrooms and storage rooms, where lights are otherwise left on all day.
Outside the building
- Parking lots and bus loops: shoebox area lights on poles.
- Building perimeter and entrances: wall packs; see the wall pack buying guide.
- Walkways: bollards and post-top lights.
- Athletic fields: see the sports field lighting guide.
Funding and rebates
Many utilities offer rebates on DLC-listed LED fixtures, and schools often qualify for special programs. Federally funded projects may have Buy American requirements; see TAA and Buy American compliance and utility rebates and DLC.
Planning a school retrofit
- Inventory fixtures by room type.
- Plan the work during summer break or weekends.
- Choose one or two fixture families and one color temperature for consistency.
- Add sensors where they will save the most.
- Plan emergency lighting with your fire marshal.
- Order spares for future replacements.
Browse our school lighting collection, or request a free layout. Districts and contractors can ask about wholesale orders.
Example: a 900 sq ft classroom
- Target: 40 foot-candles.
- Total lumens: 900 × 40 ÷ 0.65 ≈ 55,000 lumens.
- With 2x4 LED troffers at about 6,000 lumens: 9 fixtures in a 3 x 3 grid.
- Controls: vacancy sensor, dimming, and daylight dimming on the row nearest the windows.
Light and learning
Students spend hours a day under classroom lighting. Even, glare-free light helps with reading and screen work. Flicker-free LED drivers avoid the subtle flicker some older fluorescent ballasts produced. Dimming lets teachers lower the lights for projection without turning them off.
Safety and security
- Light every entrance, the bus loop, and the paths between buildings.
- Use photocells and timers so exterior lights run when needed.
- Light stairwells and corridors evenly, with emergency backup.
- Use impact-resistant fixtures in gyms and vandal-prone areas; see IK impact ratings.
Maintenance
Schools often have small maintenance teams. LED cuts relamping across thousands of fixtures. Standardizing on a few fixture models makes spares easy to stock.

Common mistakes
- Bright fixtures over whiteboards that wash out projection.
- Mixing color temperatures between rooms.
- Skipping sensors in restrooms and storage.
- Forgetting the exterior in an interior retrofit.
Frequently asked questions
How bright should a classroom be?
About 30–50 foot-candles on desks.
What color temperature is best for classrooms?
4000K is the most common choice.
Do classrooms need occupancy sensors?
Many energy codes require them in new construction and major renovations.
Related
School lighting · Office lighting guide · Fluorescent to LED conversion · Lighting resources