How many lumens do I need? Light levels for commercial spaces
The most common question we get is "how many lights do I need?" The answer starts with two numbers: the light level the space needs, measured in foot-candles, and the size of the space. This guide gives typical light levels for common commercial spaces, a simple formula to turn them into total lumens, and worked examples you can follow.

Lumens, foot-candles, and lux
- Lumens measure the total light a fixture puts out. It is the number on the product page, such as 6,182 lumens for a 2x4 troffer or 39,000 lumens for a UFO high bay.
- Foot-candles (fc) measure how much light lands on a surface: one lumen spread over one square foot. This is what you actually see on the floor, desk, or pavement.
- Lux is the metric version of foot-candles. One foot-candle equals about 10.76 lux.
Watts tell you how much power a fixture uses, not how bright it is. Always compare fixtures by lumens. See lumens, watts, and efficacy explained for more.
Typical light levels by space
These targets are typical for general lighting and are based on common industry practice, including recommendations from the Illuminating Engineering Society (IES). Specific tasks, owner standards, and local codes can call for different levels.
Indoor spaces
- Warehouse, bulk storage, inactive: 10–20 fc
- Warehouse, active storage and picking: 20–30 fc
- Distribution center, packing and shipping: 30–50 fc
- Manufacturing, general assembly: 30–50 fc
- Manufacturing, fine or detailed work: 50–100 fc
- Auto repair shop, service bays: 50–75 fc
- Garage and workshop, general: 30–50 fc
- Office, open plan and private: 30–50 fc
- Conference room: 30–50 fc
- Classroom: 30–50 fc
- Retail sales floor: 30–75 fc
- Grocery store: 50–75 fc
- Corridor and hallway: 5–20 fc
- Stairwell: 5–15 fc
- Restroom: 10–20 fc
- Commercial kitchen: 50–75 fc
- Hospital exam room: 50–100 fc
- Gymnasium, recreational: 30–50 fc
- Gymnasium, high school competition: 50–80 fc
Outdoor spaces
- Parking lot, general: 1–5 fc average
- Parking lot, retail or high-security: 3–10 fc average
- Building entrance: 5–10 fc
- Building perimeter and security: 1–5 fc
- Loading dock: 10–20 fc
- Gas station canopy: 20–50 fc
- Car dealership display lot: 20–50 fc on the front row, lower behind
- Walkways and paths: 0.5–2 fc
- Roadways, private: 0.5–2 fc
- Recreational sports fields: 20–50 fc, depending on the sport
For parking lots in more detail, see how many lumens you need for a parking lot. For sports, see our sports field and court lighting guide.
The quick formula
To estimate the total lumens a space needs:
Total fixture lumens ≈ area (sq ft) × target foot-candles ÷ 0.65
The 0.65 is a combined loss factor. Not all of a fixture's light reaches the floor: some hits walls and racking, some is absorbed by dark surfaces, and output drops slightly as fixtures age and get dirty. A factor around 0.6–0.7 works for most open commercial spaces with light-colored surfaces. Use a lower number, closer to 0.5, for rooms with dark walls, tall racking, or very high ceilings.
Then divide by the lumens of the fixture you plan to use:
Number of fixtures ≈ total fixture lumens ÷ lumens per fixture
Worked examples
Example 1: 40 x 60 shop
- Area: 2,400 sq ft
- Target: 50 fc for general shop work
- Total lumens: 2,400 × 50 ÷ 0.65 ≈ 185,000 lumens
- With 15,000-lumen UFO high bays at 100–150W: about 12–13 fixtures
- With 6,000-lumen 4 ft shop lights: about 31 fixtures
Our 40x60 shop lighting guide covers layouts for this exact size.
Example 2: 2,000 sq ft office
- Area: 2,000 sq ft
- Target: 40 fc
- Total lumens: 2,000 × 40 ÷ 0.65 ≈ 123,000 lumens
- With 2x4 LED troffers at about 6,000 lumens: about 20 fixtures, or roughly one fixture every 100 sq ft
Example 3: 20,000 sq ft warehouse with active picking
- Area: 20,000 sq ft
- Target: 25 fc
- Total lumens: 20,000 × 25 ÷ 0.6 ≈ 833,000 lumens (using 0.6 for racking)
- With 30,000-lumen high bays: about 28 fixtures
Example 4: 100-space parking lot
- Area: roughly 35,000 sq ft including drive aisles
- Target: 2 fc average
- Total lumens: 35,000 × 2 ÷ 0.5 = 140,000 lumens (outdoor spaces lose more light off the edges, so use about 0.5)
- With 22,500-lumen 150W shoebox lights: about 6–7 fixtures, placed for even coverage
Outdoor sites depend heavily on pole placement and distribution type. See outdoor light distribution types and our lighting layout and spacing guide.

Average vs. uniformity
A target like "30 foot-candles" is an average. Two layouts can hit the same average while one has dark spots between fixtures and the other is even across the floor. Uniformity is often described as a ratio of maximum to minimum, or average to minimum. Even light looks brighter, feels safer, and reduces eye strain.
The simplest way to get even light is to use more fixtures at lower output rather than fewer very bright fixtures, and to keep spacing within what the fixture's light pattern can cover. Our layout and spacing guide gives typical spacing for each fixture type.
Ceiling height changes the answer
Higher ceilings need more lumens per fixture to deliver the same foot-candles on the floor. A rough guide for open warehouses and shops:
- 12–15 ft: 8,000–15,000 lumens per fixture (LED shop lights, smaller UFOs)
- 15–20 ft: 15,000–22,000 lumens
- 20–30 ft: 20,000–40,000 lumens
- 30–40 ft: 35,000–50,000 lumens
- 40 ft and up: 50,000–80,000 lumens
See warehouse lighting by ceiling height and high bay vs. low bay lighting.
Selectable wattage makes this easier
Most Steel Tech Lights fixtures let you choose the wattage on site. If the room is brighter than you need after installation, turn the fixtures down instead of removing some. If you are unsure between two light levels, size for the higher one and dial it back. See selectable wattage and color temperature explained.
When to get a photometric layout
The formula is a solid estimate for open, rectangular spaces. For irregular buildings, tall racking, parking lots, sports fields, or any project that has to meet a specific code or owner standard, a photometric layout is the reliable way to plan. It models each fixture's real light pattern and shows foot-candles across the whole space.
We provide free layouts. Request a lighting layout with your dimensions, ceiling height, and what the space is used for.
Frequently asked questions
How many lumens per square foot do I need?
Roughly the target foot-candles divided by 0.65. For an office at 40 fc, that is about 60 lumens per square foot of fixture output. For a warehouse at 20 fc, about 30 lumens per square foot.
How many lumens does a 2-car garage need?
A typical 2-car garage is about 400–500 sq ft. At 50 fc for workshop use, that is about 30,000–38,000 lumens, or four to six 4 ft LED shop lights. See LED garage lights.
Is more light always better?
No. Too much light causes glare and wastes energy. Aim for the recommended range and use dimming or selectable wattage to fine-tune.
What is the difference between lumens and lux?
Lumens are the total light a fixture produces. Lux and foot-candles are how much of that light lands on a surface.
Related guides
Fluorescent to LED conversion · LED savings and payback · Color temperature guide · Lighting glossary · Lighting resources