LED wall pack buying guide: full cutoff vs. non-cutoff, lumens, and mounting
Wall packs are the workhorse of building exterior lighting. They light entrances, walkways, loading docks, alleys, and the parking spaces closest to the building, and they are often the first line of security lighting. This guide covers wall pack types, how much light you need, mounting height and spacing, and controls.

Full cutoff vs. non-cutoff
Full cutoff wall packs
The LEDs face down and the fixture sends no light above horizontal. Light goes to the ground near the building with little glare. Full cutoff wall packs are the best choice near property lines, homes, and roads, and are often required by local outdoor lighting ordinances. See dark sky and BUG ratings.
Non-cutoff (traditional) wall packs
The classic box shape with a front-facing lens throws light out and forward, farther from the wall, but with more glare and some light above horizontal. They cover more ground per fixture and work well for large yards, truck lots, and the backs of industrial buildings away from neighbors.
Semi-cutoff and adjustable
Some wall packs aim partly forward, or have adjustable heads, offering a middle ground.

How much light?
- Entrances and walkways: 2,000–6,000 lumens, about 15–40W LED
- Building perimeter and security: 4,000–10,000 lumens, about 30–80W
- Loading docks and truck courts: 8,000–20,000 lumens, about 60–150W
- Large yards from tall walls: 15,000–20,000+ lumens, about 120–150W
Our wall packs include selectable models up to 150W and about 19,500 lumens, so one fixture can be set for different locations. Browse LED wall packs.
Replacing HID wall packs
- 70–100W metal halide or HPS: 15–30W LED
- 150–175W metal halide: 40–60W LED
- 250W metal halide: 60–80W LED
- 400W metal halide: 100–150W LED
See the metal halide to LED chart and HPS and mercury vapor to LED.
Mounting height and spacing
- Over doors and walkways: 8–12 ft
- Perimeter and security: 12–20 ft
- Loading docks and yards: 16–25 ft
Spacing along a wall is commonly 40–60 ft at 12–16 ft mounting height, closer for lower fixtures or where more light is needed. See the layout and spacing guide.
Wall packs typically mount over a junction box or through the wall, and many accept conduit from the side or back. See LED fixture mounting options.
Controls
- Photocells turn wall packs on at dusk and off at dawn. Many of our wall packs include one.
- Motion sensors brighten lights when someone approaches, useful for back doors and alleys.
- Time clocks dim or turn lights off after hours where security allows.
See photocells and motion sensors.
Color temperature
- 3000K near homes and for a warmer look
- 4000K for most commercial buildings
- 5000K for industrial sites and security, and for clearer camera footage
See 3000K vs. 4000K vs. 5000K.
Ratings
Wall packs must be rated for wet locations. Check the IP rating and operating temperature for your climate; see IP ratings and wet locations.

Example: a 200 x 100 ft building
- Perimeter: 600 ft.
- Spacing: about 50 ft at 14 ft mounting height.
- Wall packs: about 12, around 40–60W each, full cutoff.
- Loading dock side: add 2–3 higher-output wall packs or flood lights over the dock doors.
- Doors: smaller wall packs or entry lights over each door.
Security lighting tips
- Light every door, especially rear and service doors.
- Light the area between the building and the parking lot.
- Avoid glare toward cameras; position fixtures so cameras are not looking into them.
- Keep color temperature consistent with the parking lot lights.
See security lights.
Wall packs vs. flood lights
- Wall packs spread light down and out near the building, with a defined pattern.
- Flood lights aim a beam at a specific target, such as a sign, facade, or distant yard area.
Many sites use both. See beam angles for flood lights.
Common mistakes
- Non-cutoff wall packs facing homes or roads.
- Too much wattage, causing harsh glare.
- Too few fixtures, leaving dark gaps between pools of light.
- No photocell, leaving lights on all day.
Frequently asked questions
What size wall pack do I need?
For most building perimeters, 30–80W LED (4,000–10,000 lumens). For loading docks and yards, 60–150W.
Full cutoff or non-cutoff?
Full cutoff near property lines and homes, or where ordinances require it. Non-cutoff where you need maximum throw and glare is less of a concern.
How high should a wall pack be mounted?
Usually 12–20 ft for perimeter lighting, lower over doors.
Related
LED wall packs · Security lights · LED flood lights · Outdoor LED lighting · Request a layout · Lighting resources