Skip to content

US Based Company

Ships From USA Warehouses

100,000+ Lights Shipped

Trusted by Contractors Nationwide

Contractor Pricing

Bulk Discounts Available

Orders Before 2PM

Ship Same Day

Expert Support

Lighting Specialists

Sports Field and Court Lighting Guide

Sports field and court lighting guide

Lighting a field or court is different from lighting a parking lot. Players need to track a fast-moving ball against the sky, spectators need to see the whole field, and neighbors need light to stay on the field. This guide covers typical light levels for common sports, pole heights and placement, fixture selection, and how to control glare and spill.

Sports field at night lit by LED stadium lights

Typical light levels by sport

These are common targets for recreational and high school play, based on general industry practice, including IES sports lighting recommendations. Leagues, college programs, and televised events often require more, and the governing body's standard always takes priority.

  • Baseball and softball, recreational: about 30 fc infield, 20 fc outfield
  • Baseball and softball, high school: about 50 fc infield, 30 fc outfield
  • Football and soccer, recreational: about 20–30 fc
  • Football and soccer, high school: about 30–50 fc
  • Tennis and pickleball, recreational: about 30–50 fc
  • Tennis, club and tournament: about 50–75 fc
  • Outdoor basketball, recreational: about 20–30 fc
  • Volleyball and multi-use courts: about 20–50 fc
  • Indoor gymnasiums, recreational: about 30–50 fc; high school competition 50–80 fc

Uniformity matters as much as the average. Players notice dark spots when a ball passes through them. See our gym and church lighting guide for indoor courts.

Pole heights and placement

Taller poles reduce glare for players, improve uniformity, and let fixtures aim down more steeply, which keeps light on the field. Typical heights:

  • Tennis and pickleball courts: 20–30 ft poles along the sides
  • Basketball courts: 20–30 ft
  • Little league baseball and softball: 40–60 ft
  • High school baseball: 60–80 ft
  • Soccer and football, recreational: 50–70 ft
  • High school football: 60–90 ft

Poles generally go along the sidelines, outside the playing area and safety zones, never behind goals or where a player could run into them. For tennis, poles are usually along the side fences, not behind the baselines, to keep fixtures out of players' sightlines on serves.

See the light pole buying guide. Sports poles are much taller and heavier than parking lot poles and usually need engineered foundations.

Athletic court lit at night

Choosing fixtures

  • Output: sports fixtures commonly range from about 300W to 1,500W LED, replacing 1,000W–1,500W metal halide.
  • Beam angle: narrower beams throw light farther from tall poles; wider beams fill closer areas. A field usually mixes beam angles. See beam angles for flood and sports lights.
  • Mounting: trunnion or yoke mounts with aiming angle markings, and a cross-arm on the pole for multiple fixtures.
  • Color temperature: 5000K is the most common choice for sports; it looks bright and crisp and suits video.
  • Glare control: visors and shields reduce glare for players and spill onto neighbors.
  • Voltage: many fields run on 277V or 480V; see 277V and 480V LED lighting.

Browse LED stadium lights and stadium and sports lights. Smaller courts and practice fields often use high-output LED flood lights.

Aiming

Each fixture is aimed at a specific point on the field. A photometric design sets these aiming points so light overlaps evenly. Aiming fixtures too high causes glare and spill; aiming them all at the center leaves the edges dark. Use the aiming angles from the layout and lock fixtures in place.

Controlling spill and glare

Neighbors are often the main concern for community fields. To keep light on the field:

  • Use taller poles so fixtures can aim down at steeper angles.
  • Choose fixtures with sharp cutoff optics and add visors or shields.
  • Avoid aiming fixtures above about 60–65° from straight down.
  • Turn lights off on a timer after play ends.

Many towns have outdoor lighting ordinances that limit light at the property line; see dark sky and BUG ratings.

Converting from metal halide

Older fields often use 1,000W or 1,500W metal halide fixtures. LED replacements:

  • Use roughly 40–60% less energy.
  • Turn on instantly, with no 10–15 minute warmup or restrike delay after a power blip.
  • Hold their output much longer, with no gradual dimming between relamps.
  • Avoid expensive crane rentals for lamp changes on tall poles.

LED fixtures often have a different weight and EPA than the old fixtures, so confirm the existing poles and cross-arms can carry them.

Frequently asked questions

How many lumens do I need for a tennis court?

A recreational court at about 40 fc over a 60 x 120 ft area is roughly 7,200 sq ft. At 40 fc with a loss factor near 0.6, that is about 480,000 fixture lumens (7,200 × 40 ÷ 0.6), commonly split across 8 fixtures on 4 poles. Sharp-cutoff sports optics put more of their light on the court, so a photometric layout often brings that number down.

How tall should tennis court light poles be?

Usually 20–30 ft, along the side fences.

What color temperature is best for sports lighting?

5000K is the most common choice.

Do I need a lighting layout for a field?

Yes. Sports lighting depends on aiming and pole placement. A photometric layout ensures even light and controls spill. Request a free layout.

Related

LED stadium lights · Stadium and sports lights · LED gym lights · LED flood lights · Steel light poles · Lighting resources

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare