IK impact ratings and shatterproof light fixtures
In gyms, parking garages, schools, warehouses, prisons, and public spaces, light fixtures get hit: by balls, forklifts, ladders, carts, and sometimes on purpose. Glass lenses and tubes can shatter and fall. Food plants and clean rooms cannot risk broken glass at all. This guide explains IK impact ratings, shatterproof and vandal-resistant fixtures, and where you need them.

What the IK rating means
The IK rating, from international standard IEC 62262, measures how much impact energy an enclosure can withstand. The scale runs from IK00 (no protection) to IK10 (highest):
- IK06: 1 joule
- IK07: 2 joules
- IK08: 5 joules, roughly a 1.7 kg (3.75 lb) object dropped from 300 mm (about 12 in)
- IK09: 10 joules
- IK10: 20 joules, roughly a 5 kg (11 lb) object dropped from 400 mm (about 16 in)
IK08 and higher is common for vandal-resistant and impact-resistant fixtures. IK10 is the usual target for the most demanding public and correctional spaces.
Shatterproof vs. vandal-resistant
- Shatterproof means the fixture uses lenses and covers that will not shatter into sharp pieces, such as polycarbonate instead of glass. Important in food processing, food service, schools, and anywhere broken glass is a hazard.
- Vandal-resistant fixtures add tamper-resistant screws, impact-rated housings and lenses, and sometimes wire guards.
- Impact-resistant high bays and gym lights often add wire guards to protect against balls.
Where impact-rated fixtures make sense
- Gyms and sports courts: ball strikes; use wire guards or impact-rated lenses. See LED gym lights.
- Parking garages: vehicle strikes, vandalism, and moisture; see the parking garage lighting guide.
- Food processing and commercial kitchens: no glass allowed in many areas; use polycarbonate vapor tight fixtures.
- Schools, stairwells, and corridors: see stairwell lighting.
- Warehouses: forklifts and ladders near low fixtures.
- Public parks and transit stops: vandalism.
- Correctional facilities: tamper resistance and IK10.

Materials
- Polycarbonate lenses resist impact far better than glass or acrylic and do not shatter.
- Acrylic (PMMA) is clear and UV-stable but more brittle than polycarbonate.
- Tempered glass is strong and heat resistant but can still break.
- Die-cast aluminum housings resist impact better than thin steel.
Combining IK and IP ratings
Many tough environments also involve water and dust. A vapor tight fixture with a polycarbonate lens might carry both an IP65 rating for water and dust and an IK08 rating for impact. See IP ratings and wet locations.
Food safety and glass
Food processing plants, commercial kitchens, and food warehouses often follow food safety programs that restrict glass and brittle plastics in production areas, because broken pieces can contaminate food. Typical approaches include:
- Polycarbonate lenses and housings instead of glass.
- Sealed vapor tight fixtures that keep fragments contained if a fixture is damaged.
- Shatter-resistant coatings or sleeves on any remaining tubes.
- A fixture register and regular inspections.
See our commercial kitchen lighting guide and vapor tight lights.
Choosing for vandal-prone areas
- Choose the highest practical IK rating, ideally IK08–IK10.
- Use tamper-resistant fasteners.
- Mount fixtures as high as the application allows.
- Choose die-cast aluminum housings and polycarbonate lenses.
- Avoid exposed photocells and sensors that can be easily damaged, or choose recessed versions.
- Light the area well; well-lit spaces see less vandalism.
Wire guards
Wire guards protect high bays and strip fixtures from balls and impacts. Make sure the guard is made for the fixture and attaches securely so it does not fall if struck.
Testing and labels
IK ratings are tested by striking the enclosure with a specified energy and checking that it still protects as intended. Look for the IK rating on the spec sheet. A fixture without an IK rating may still be sturdy, but you cannot compare it directly.

Common mistakes
- Glass lenses in food areas.
- No guards in gyms.
- Low-mounted fixtures without impact protection in warehouses and garages.
- Standard screws in vandal-prone areas.
Frequently asked questions
What IK rating is vandal-proof?
IK08 and up is generally considered vandal-resistant. IK10 is the highest rating.
Are LED lights shatterproof?
Many are, because they use polycarbonate lenses instead of glass tubes. Check the product page.
Do gym lights need guards?
Wire guards are recommended wherever balls can hit fixtures.
Related
Shatterproof light fixtures · Vapor tight lights · Gym and church lighting guide · Commercial kitchen lighting · Lighting resources