Parking Lot Lights
Free shipping
On orders $350+
5 YEAR WARRANTY
On All Products
30 DAY RETURNS
Easy Returns
EXPERT SUPPORT
Lighting Specialists
Filters
Shoebox Mounting Bracket
Steel Tech LightsReplacement or additional mounting bracket for Steel Tech Lights LED shoebox parking lot lights (150W-300W). Choose the mount that fits your pole, ...
Shoebox Glare Shield
Steel Tech LightsClip-on glare shield (house-side shield) for Steel Tech Lights LED shoebox parking lot lights. Blocks backlight spill toward buildings and neighbor...
Steel Tech Lights High-Voltage LED Shoebox Area Light – 500W Max, Wattage & CCT Selectable – 73,430 Lumens – 277-480V
Steel Tech Lights- Watts: 500W Max, Selectable
- Lumens: Up to 73,430 lm
- Kelvin: Selectable
- Voltage: 277-480V
Steel Tech Lights High-Voltage LED Shoebox Area Light – 200W Max, Wattage & CCT Selectable – 31,220 Lumens – 277-480V
Steel Tech Lights- Watts: 200W / 150W / 100W Selectable
- Lumens: Up to 31,220 lm
- Kelvin: 3000K / 4000K / 5000K Selectable
- Voltage: 277-480V
Steel Tech Lights 150W LED Shoebox Area Light – 22,500 Lumens – 5000K – 120-277V
Steel Tech Lights- Watts: 150W
- Lumens: 22,500 lm
- Kelvin: 5000K
- Voltage: 120-277V
Steel Tech Lights LED Area Light with Photocell – 150W Max, Wattage & CCT Selectable – 25,500 Lumens – Medium-Wide Spread (Type III) – 120-277V
Steel Tech Lights- Watts: 150W Max, Selectable
- Lumens: Up to 25,500 lm
- Kelvin: 3000K / 4000K / 5000K Selectable
- Voltage: 120-277V
Steel Tech Lights LED Shoebox Area Light – 150W Max, Wattage & CCT Selectable – 23,186 Lumens – 120-277V
Steel Tech Lights- Watts: 150W / 100W / 70W Selectable
- Lumens: Up to 23,186 lm
- Kelvin: 3000K / 4000K / 5000K Selectable
- Voltage: 120-277V
Steel Tech Lights LED Shoebox Parking Lot Light – 200W/240W/300W Selectable – Up to 45,000 Lumens – 277-480V
Steel Tech Lights- Watts: 200W / 240W / 300W Selectable
- Lumens: Up to 45,000 lm
- Voltage: 277-480V
Steel Tech Lights LED Shoebox Parking Lot Light – 100W/120W/150W Selectable – Up to 22,500 Lumens – 277-480V
Steel Tech Lights- Watts: 100W / 120W / 150W Selectable
- Lumens: Up to 22,500 lm
- Voltage: 277-480V
Steel Tech Lights LED Shoebox Parking Lot Light – 300W/400W/500W Selectable – Up to 73,430 Lumens – 120-277V
Steel Tech Lights- Watts: 300W / 400W / 500W Selectable
- Lumens: Up to 73,430 lm
- Voltage: 120-277V
Steel Tech Lights LED Shoebox Parking Lot Light – 300W/350W/400W Selectable – Up to 60,000 Lumens – 120-277V
Steel Tech Lights- Watts: 300W / 350W / 400W Selectable
- Lumens: Up to 60,000 lm
- Voltage: 120-277V
Steel Tech Lights LED Shoebox Parking Lot Light – 200W/240W/300W Selectable – Up to 45,000 Lumens – 120-277V
Steel Tech Lights- Watts: 200W / 240W / 300W Selectable
- Lumens: Up to 45,000 lm
- Voltage: 120-277V
Steel Tech Lights LED Shoebox Parking Lot Light – 200W – 31,220 Lumens – 4000K – 120-277V
Steel Tech Lights- Watts: 200W
- Lumens: 31,220 lm
- Kelvin: 4000K
- Voltage: 120-277V
Steel Tech Lights LED Shoebox Parking Lot Light – 100W/150W/200W Selectable – Up to 30,000 Lumens – 120-277V
Steel Tech Lights- Watts: 100W / 150W / 200W Selectable
- Lumens: Up to 30,000 lm
- Voltage: 120-277V
Steel Tech Lights 120W/100W/80W LED Semi Cutoff Wall Pack – Up to 16,555 Lumens – 120–277V – Selectable CCT – Included Photocell
Steel Tech Lights- Watts: 120W / 100W / 80W Selectable
- Lumens: Up to 16,555 lm
- Kelvin: 3000K / 4000K / 5000K Selectable
- Voltage: 120-277V
Steel Tech Lights 80W/60W/45W LED Wall Pack – Up to 12,336 Lumens – 120–277V – Selectable CCT – IP65
Steel Tech Lights- Watts: 80W / 60W / 45W Selectable
- Lumens: Up to 12,336 lm
- Kelvin: 3000K / 4000K / 5000K Selectable
- Voltage: 120-277V
- Beam Angle: 120°
- Lens: Glass
Steel Tech Lights 120W/100W/90W LED Wall Pack – Up to 16,671 Lumens – 120–277V – Selectable CCT
Steel Tech Lights- Watts: 120W / 100W / 90W Selectable
- Lumens: Up to 16,671 lm
- Kelvin: 3000K / 4000K / 5000K Selectable
- Voltage: 120-277V
- Beam Angle: 120°
- Lens: Glass
Steel Tech Lights 120W/100W/90W LED Wall Pack – 277–480V – Up to 16,384 Lumens – Selectable CCT – 0–10V Dimmable
Steel Tech Lights- Watts: 120W / 100W / 90W Selectable
- Lumens: Up to 16,384 lm
- Kelvin: 3000K / 4000K / 5000K Selectable
- Voltage: 277-480V
- Beam Angle: 120°
Steel Tech Lights 80W/60W/45W LED Wall Pack – 277–480V – Up to 11,096 Lumens – Selectable CCT
Steel Tech Lights- Watts: 80W / 60W / 45W Selectable
- Lumens: Up to 11,096 lm
- Kelvin: 3000K / 4000K / 5000K Selectable
- Voltage: 277-480V
- Beam Angle: 120°
Selectable LED Full Cut-Off Wall Pack | 20W/30W/40W | 3000K/4000K/5000K | 6,000 Lumens | Steel Tech Lights
Steel Tech Lights- Watts: 20W / 30W / 40W Selectable
- Lumens: 6,000 lm
- Kelvin: 3000K / 4000K / 5000K Selectable
- Voltage: 120-277V
- Lens: Polycarbonate
Steel Tech Lights 120W/100W/80W Versatile LED Wall Pack – Up to 15,375 Lumens – 120–277V – Selectable CCT – Built-In Photocell
Steel Tech Lights- Watts: 120W / 100W / 80W Selectable
- Lumens: Up to 15,375 lm
- Kelvin: 3000K / 4000K / 5000K Selectable
- Voltage: 120-277V
- Lens: Polycarbonate
LED parking lot lights and shoebox area lights
A well-lit parking lot keeps customers and employees safe, discourages theft and vandalism, helps cameras capture usable footage, and makes a property look cared for after dark. LED parking lot lights do all of that while using a fraction of the power of the metal halide and high-pressure sodium fixtures most lots were built with, and they can run for many years without a bucket truck. This collection includes shoebox area lights from 70W to 500W, photocell-equipped models, 277–480V versions for industrial sites, mounting brackets, and the poles to put them on.
Most fixtures are selectable for wattage and color temperature, run on 120–277V or 277–480V, and include 0–10V dimming. They carry our 5-year warranty and 60-day returns, and ship in 1–3 business days. Parking lots are where a layout pays off most, so send us your site plan and we will lay out your lot for free: fixture count, pole locations, heights, and distribution types.
Shop parking lot lights by output
Small lots and drive lanes on 15–20 ft poles: 70–100W, about 10,000–15,000 lumens. Typical retail and office lots on 20–25 ft poles: 150W, about 20,000–25,000 lumens. Our 150W shoebox puts out 22,500 lumens at 150 lumens per watt; the selectable 70/100/150W shoebox reaches 23,186 lumens; and the 150W area light with photocell reaches 25,500 lumens with a Type III distribution and a photocell included. Large lots, truck yards, and distribution centers on 25–35 ft poles: 200–300W, about 30,000–45,000 lumens, such as the 200W high-voltage shoebox at 31,220 lumens. Very large lots and industrial yards: up to the 500W shoebox at 73,430 lumens.
How much light does a parking lot need?
General parking is commonly lit to about 1–5 foot-candles average; retail, banks, hotels, and high-security sites often aim for 3–10. Entrances, drive-thrus, and building fronts are usually brighter than the back rows, and uniformity matters as much as the average, since pools of light separated by dark gaps feel less safe than even light at a lower level. A quick estimate: total fixture lumens ≈ lot area × target foot-candles ÷ 0.5. A 100-space lot of about 35,000 sq ft at 2 foot-candles needs about 140,000 lumens, or six to seven 150W shoeboxes, placed for even coverage. Our how many lumens for a parking lot guide and how many lumens do I need go deeper.
Distribution types: where the light lands
The distribution type describes the shape of the light pattern on the ground. Type III throws light forward and to the sides and is the most common choice for poles along the edge of a lot and along drive lanes; many of our shoeboxes use a medium-wide Type III pattern. Type IV throws light forward with very little behind, which keeps light off neighboring property at the lot line. Type V is a round, symmetric pattern for poles in the middle of a lot. Back-to-back Type III fixtures on one pole are another common center-island setup. Choosing the right type for each pole is how you get even light with fewer poles. See outdoor light distribution types.
Poles, height, and spacing
Most retail and office lots use 20–25 ft poles; large lots and truck yards use 25–35 ft. Poles are commonly spaced about 3 to 4 times the mounting height apart, so a 25 ft pole might be 75–100 ft from the next. Taller poles cover more area per fixture but need more output and stronger poles. Check the pole's wind rating (EPA) against the fixtures you mount on it, especially with two or four heads per pole. Concrete bases raised a couple of feet above grade protect poles from bumpers. Shop steel light poles and read the light pole buying guide and layout and spacing guide.
Mounting options
Shoebox fixtures mount to square poles with a direct arm, to round poles or tenons with a slip fitter, or to walls with a wall bracket. Many shoebox lights accept an adjustable bracket so you can level the fixture or tilt it slightly. Keep fixtures level wherever possible: tilting pushes light farther but adds glare and uplight. Our shoebox mounting bracket and the mounting options guide cover the choices.
Voltage
Most parking lot circuits run on 208V, 240V, or 277V, all covered by our 120–277V fixtures. Industrial sites and some large lots run 480V; for those, choose a 277–480V model. Confirm the voltage with your electrician before ordering. See 277V and 480V LED lighting and 480V lighting.
Controls: photocells, timers, and dimming
Parking lot lights should never run during the day. A photocell on each fixture, or a site photocell or time clock, turns them on at dusk and off at dawn. Some of our area lights include a photocell; others have a receptacle or port for one. Many sites also dim lots after closing, keeping a base level for security and raising it with motion sensors when someone arrives. Many local ordinances and energy codes require some form of after-hours reduction. See photocells and motion sensors and 0–10V dimming and lighting controls.
Color temperature
4000K is the most common choice for parking lots: clean white light that looks natural and works well on camera. 5000K is popular for industrial sites, car dealerships, and security-focused properties. 3000K is often preferred near homes and where dark-sky rules apply. Whatever you choose, keep the whole lot and building the same. See 3000K vs. 4000K vs. 5000K.
Glare, light trespass, and dark sky rules
Flat-lens shoebox fixtures mounted level send no light above the horizontal, which keeps sky glow and glare down. Near homes and roads, use Type IV fixtures or shields on the poles closest to the lot line, and avoid tilting fixtures up. Many towns limit light at the property line and set maximum BUG ratings for outdoor fixtures. A photometric layout shows exactly how much light reaches the property line before you buy. See dark sky, light trespass, and BUG ratings.
Replacing metal halide and HPS parking lot lights
A 400W metal halide shoebox draws about 458W with its ballast; a 400W HPS about 465W. A 150W LED shoebox typically replaces either with equal or better light on the pavement, and far better color. 250W fixtures are typically replaced with 80–100W LED, and 1,000W with 300–400W. Savings example: 10 lot lights at 458W replaced with 150W LED, running dusk to dawn (about 4,300 hours a year) at $0.13 per kWh, save about 13,200 kWh and $1,700 a year, plus the cost of renting a lift to relamp tall poles. See the metal halide to LED replacement chart, HPS to LED guide, and LED savings and payback.
Parking lot lighting by property type
Retail centers and restaurants: bright, even light from the road to the door, with brighter entrances and drive-thrus. Offices and medical buildings: even 4000K light and good coverage on walkways to the building. Apartments and HOAs: comfortable light near homes, often 3000K with Type IV fixtures at the edges. Car dealerships: high light levels on the front display row, 5000K with high CRI so cars look their best. Warehouses and truck yards: tall poles, high-output fixtures, and 480V options. Schools and churches: lots used mostly in the evening, with photocells and timers. Gas stations and convenience stores: see the gas station and canopy lighting guide.
Related collections
Light the building with LED wall packs, signs and facades with flood lights, walkways with bollards and post-top lights, and roads with street lights. For volume, see shoebox package deals and wholesale orders.
FAQ
What wattage LED replaces a 400W metal halide parking lot light?
Usually a 150W LED shoebox, about 20,000–25,000 lumens.
How tall should parking lot poles be?
Most commercial lots use 20–25 ft; large lots and truck yards 25–35 ft.
How far apart should parking lot lights be?
Commonly 3 to 4 times the mounting height, adjusted for output and distribution type.
What is a shoebox light?
A rectangular, flat-lens area light that mounts on a pole and directs light down onto a lot or roadway. It is the most common parking lot fixture.
Do parking lot lights need a photocell?
They need some form of automatic control: a photocell on each fixture, or a site photocell or time clock.
Can I reuse my existing poles?
Often yes. Check the pole's condition, mounting type, and EPA rating against the new fixtures.
Are your parking lot lights DLC listed?
Many are, which helps with utility rebates. Check each product page. See utility rebates and DLC.
More help: lighting resources or contact us.