Skip to content

US Based Company

Ships From USA Warehouses

100,000+ Lights Shipped

Trusted by Contractors Nationwide

Contractor Pricing

Bulk Discounts Available

Orders Before 2PM

Ship Same Day

Expert Support

Lighting Specialists

High Bay vs. Low Bay Lighting

High bay vs. low bay lighting: which do you need?

"High bay" and "low bay" describe fixtures designed for different ceiling heights. Picking the right type gets light to the floor efficiently without glare or dark spots. This guide explains the difference, the main fixture styles, and how to choose by ceiling height and layout.

Diagram of low bay, medium bay, and high bay mounting heights in a warehouse

The difference

  • Low bay fixtures are made for ceilings roughly 12–20 ft high. They spread light wider so it covers the floor evenly from a lower height.
  • High bay fixtures are made for ceilings roughly 20 ft and higher, often up to 40–50 ft. They produce more lumens and often focus the beam so enough light reaches the floor from far above.

The cutoff around 20 ft is a general guideline, not a hard rule. A 20,000-lumen fixture with a wide lens can work well at 18 ft, and a narrow-beam fixture can light racking aisles at 30 ft.

Common fixture styles

UFO (round) high bays

Compact round fixtures that hang from a hook or pendant. They give a round light pattern, install quickly, and are the go-to choice for open floors, gyms, and shops. Browse UFO high bays.

Linear high bays

Long rectangular fixtures that put out a long, narrow pattern. Ideal centered over racking aisles, and for even rows across manufacturing floors. Browse linear high bays, and the 6G and 7G series.

LED shop lights and strip lights

4 ft and 8 ft fixtures for lower ceilings in garages, workshops, and small warehouses. Browse LED shop lights and 8 ft LED lighting.

Vapor tight fixtures

Sealed linear fixtures for wet or dusty spaces at low to medium heights. Browse vapor tight lights.

Diagram comparing UFO high bays on an open floor with linear high bays over aisles

Choosing by ceiling height

  • 10–14 ft: LED shop lights or strip lights, 4,000–8,000 lumens each.
  • 14–20 ft: low bay or small UFO high bays, 10,000–20,000 lumens.
  • 20–25 ft: 100–150W high bays, 15,000–22,000 lumens.
  • 25–35 ft: 150–240W high bays, 22,000–36,000 lumens.
  • 35–45 ft: 240–300W high bays, 35,000–48,000 lumens.
  • 45 ft and up: 400–500W high bays, up to 80,000 lumens.

See warehouse lighting by ceiling height and how many lumens do I need?.

Choosing by layout

  • Open floors, gyms, retail: UFO high bays in a grid.
  • Racking aisles: linear high bays, one row centered over each aisle.
  • Manufacturing lines: linear high bays in rows along the work areas.
  • Mixed spaces: combine both.

See our high bay buying guide for warehouses.

Other things to check

Example: 60 x 100 ft warehouse at 24 ft

  • Area: 6,000 sq ft.
  • Use: active storage and picking, about 25 fc.
  • Total lumens: 6,000 × 25 ÷ 0.6 ≈ 250,000 lumens (0.6 for racking).
  • Option A, open floor: about 12 UFO high bays at about 21,000 lumens, in a 3 x 4 grid roughly 20–25 ft apart.
  • Option B, racking: linear high bays centered over each aisle, spaced along the aisle to reach about 25 fc at the lower shelves.

Beam angle and racking

High bays come with different beam spreads. Wide beams (around 110–120°) suit open floors. Narrower beams (around 60–90°) push more light down between tall racks. Linear high bays with aisle optics put light on rack faces instead of rack tops.

Heat, dust, and moisture

  • Hot ceilings: warehouse ceilings in summer can be much hotter than the floor. Check the fixture's maximum ambient temperature.
  • Dust: choose sealed fixtures in dusty plants and clean heat sinks periodically.
  • Moisture: freezers, food plants, and wash-down areas need wet-location or vapor tight fixtures; see IP ratings and wet locations.
  • Cold storage: LEDs work well in the cold; confirm the low-temperature rating.

Controls in warehouses

Warehouse aisles are often empty much of the day. High-low occupancy sensors that dim empty aisles to 10–30% and bring them to full when a forklift arrives can cut lighting energy substantially. See 0–10V dimming and lighting controls.

Common mistakes

  • Too few, too bright fixtures, causing glare and dark spots.
  • UFOs over narrow aisles, wasting light on rack tops.
  • Ignoring voltage; many warehouses run 277V or 480V.
  • No sensors in low-traffic aisles.

Frequently asked questions

What height is considered high bay?

Generally ceilings of about 20 ft and higher.

Can I use a high bay in a low ceiling?

Yes, at a lower wattage setting with a wide beam, but at 10–14 ft, shop lights or strip lights usually give more even light with less glare.

UFO or linear high bay?

UFO for open areas; linear for aisles and rows.

Related

Warehouse lights · High bay LED lighting · Metal halide to LED chart · Layout and spacing guide · Lighting resources

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare