Skip to content

US Based Company

Ships From USA Warehouses

100,000+ Lights Shipped

Trusted by Contractors Nationwide

Contractor Pricing

Bulk Discounts Available

Orders Before 2PM

Ship Same Day

Expert Support

Lighting Specialists

UL, ETL and DLC Listings Explained

UL, ETL, and DLC listings explained

Commercial lighting product pages are full of certification marks: UL Listed, ETL Listed, DLC Premium, cUL, IP65, Energy Star. Some are about safety, some are about efficiency and rebates, and some are about where a fixture can be installed. This guide explains the marks you will see most often, what each one means, and when you need it.

Office with LED flat panels

Safety listings: UL and ETL

Electrical codes and inspectors generally require light fixtures to be listed by a Nationally Recognized Testing Laboratory (NRTL), recognized by OSHA. The two most common NRTLs for lighting are:

  • UL (Underwriters Laboratories). A UL Listed mark means the product was tested to the applicable UL safety standard, such as UL 1598 for luminaires.
  • ETL (Intertek). An ETL Listed mark means Intertek tested the product to the same UL safety standards.

UL and ETL are equivalent for code compliance. Both test to the same standards, and inspectors accept either. A "c" mark (cUL or cETL) means the product is also listed for Canada; "cULus" or "cETLus" covers both countries.

"Listed" is not the same as "recognized." A UL Recognized component is a part that has been tested for use inside a listed product, not a complete fixture.

Location ratings

Safety listings also specify where a fixture can go:

  • Dry location: indoor spaces with no moisture.
  • Damp location: protected from direct rain but exposed to moisture, such as covered porches and some canopies.
  • Wet location: exposed to rain, spray, or wash-down.

See IP ratings and wet locations.

DLC: efficiency and rebates

The DesignLights Consortium (DLC) maintains a list of commercial LED products that meet requirements for efficacy, light quality, lifetime, and other performance measures. DLC is not a safety listing.

  • DLC Standard meets the base requirements.
  • DLC Premium meets stricter efficiency and quality requirements.

Why it matters: many U.S. utilities require a fixture to be on the DLC list to qualify for a rebate. Some pay more for DLC Premium. See LED utility rebates and DLC listing explained.

Many of our troffers, high bays, wall packs, and area lights are DLC listed. Check each product page for its current listing.

Energy Star

Energy Star mainly covers residential and light commercial products such as bulbs and some fixtures. Most commercial and industrial fixtures use DLC instead.

Other marks you may see

How to verify a listing

  • Look for the mark on the product label and spec sheet.
  • UL listings can be checked in UL's online database, and Intertek listings in its online directory.
  • DLC listings can be searched on the DLC Qualified Products List.

Our certifications and compliance page covers our products. If you need spec sheets or listing documents for a submittal, contact us.

Listings for specific applications

  • Wet location listing for outdoor and wash-down fixtures.
  • Damp location listing for canopies and covered areas.
  • Suitable for use in air-handling spaces (plenum rated) for some fixtures above ceilings.
  • IC rated for recessed fixtures that may contact insulation.
  • Emergency lighting listing (UL 924) for emergency drivers, units, and exit signs.
  • Hazardous location listings for classified areas.

Why listings matter for inspection and insurance

Electrical inspectors check for a listing mark on installed fixtures. An unlisted fixture can fail inspection, delay a certificate of occupancy, and create problems with insurance after a fire or loss. Buying listed fixtures avoids those risks.

DLC and rebates in practice

  1. Find your utility's commercial lighting rebate program.
  2. Check the program's rules: DLC Standard or Premium, eligible fixture types, pre-approval requirements.
  3. Confirm each product's DLC listing at the specific setting you plan to use.
  4. Submit the application, usually with invoices and spec sheets.

See LED utility rebates and DLC listing explained.

Common mistakes

  • Assuming ETL is lesser than UL. It is not, for code purposes.
  • Assuming DLC is a safety listing. It is not.
  • Installing a dry-location fixture outdoors.
  • Buying before checking rebate rules.

Warehouse with LED high bays

Frequently asked questions

Is ETL as good as UL?

For code compliance, yes. Both are nationally recognized testing labs that test to the same UL standards.

Do I need DLC-listed lights?

Only if you want a utility rebate that requires it, or your project specification calls for it. DLC does not affect whether a fixture is safe or code compliant.

What does DLC Premium mean?

The fixture meets DLC's stricter efficiency and quality requirements, which can qualify for higher rebates.

Related

Certifications and compliance · LED savings and payback · Lighting glossary · Lighting resources

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare