CRI (color rendering index) explained
Two lights can be equally bright and the same color temperature, yet one makes products, paint, and faces look natural while the other makes them look flat or off. The difference is color rendering, usually measured by CRI. This guide explains what CRI is, what number you need, and how it differs from color temperature.

What CRI measures
The color rendering index rates how accurately a light source shows colors compared with a reference light such as daylight. It runs up to 100:
- CRI 90+: excellent. Colors look natural and rich.
- CRI 80–89: good. The standard for most commercial LED lighting.
- CRI 70–79: fair. Acceptable for some industrial and outdoor uses.
- Below 70: poor. High-pressure sodium is around 20–25; colors are hard to tell apart.
Check each product page or spec sheet for a fixture's CRI rating.
CRI vs. color temperature
These are often confused:
- Color temperature (CCT), measured in kelvin, describes whether white light looks warm (3000K) or cool (5000K). See 3000K vs. 4000K vs. 5000K.
- CRI describes how accurately that light shows the colors of objects.
A 5000K light can have a high or low CRI. Choose both.
What CRI do you need?
- Retail, showrooms, salons, restaurants, galleries: 90+ where products or food need to look their best; 80+ minimum.
- Offices, schools, healthcare: 80+.
- Paint shops, print shops, auto body color matching, inspection: 90+.
- Warehouses, manufacturing, shops: 70–80+ is usually fine; 80+ if workers read labels or match colors.
- Parking lots, roads, security: 70+ is typical. Even CRI 70 LED is a big improvement over HPS for camera footage and recognizing vehicles and people.

R9: the red value
CRI is an average of how well a light renders a set of test colors. It does not include saturated red, which is measured separately as R9. Lights with a decent CRI can still render reds poorly, making skin, meat, wood, and red products look dull. If red rendering matters, such as in food service, healthcare, or retail, ask for the R9 value or choose 90+ CRI.
Does CRI affect brightness?
Higher-CRI LEDs are usually slightly less efficient, producing a little fewer lumens per watt. For most commercial spaces, CRI 80 balances quality and efficiency. Use 90+ where color really matters.
How CRI is measured
CRI compares how a light source renders a standard set of test colors against a reference source at the same color temperature. The most common figure, often written Ra, averages the first eight test colors. A score of 100 means the test colors look the same as under the reference.
A newer method, TM-30, uses 99 color samples and reports a fidelity score (Rf) and a gamut score (Rg), showing whether colors look more or less saturated. Some lighting specifiers use TM-30 for critical color work, but CRI remains the figure you will see on most commercial product pages.
CRI by light source
- Incandescent and halogen: about 100
- Daylight: treated as 100 as a reference
- Quality LED: commonly 80–95
- Fluorescent T8: about 75–85
- Metal halide: about 65–90, depending on the lamp
- Mercury vapor: about 15–50
- High-pressure sodium: about 20–25
Switching from HPS or older metal halide to LED usually brings a dramatic improvement in how colors look, even at standard CRI 70–80.
Where color rendering pays off
- Retail: products look closer to how customers will see them at home or in daylight, which can reduce returns.
- Food service and grocery: produce and meat look fresh.
- Paint and auto body: color matching and defect spotting.
- Healthcare: assessing skin tone and wounds.
- Security: cameras capture vehicle and clothing colors.
- Warehouses: reading color-coded labels and safety markings.

Balancing CRI, efficacy, and cost
Higher CRI usually costs a little efficiency and sometimes a little price. A practical approach:
- Use CRI 90+ where color judgment is part of the job.
- Use CRI 80+ for general indoor spaces where people work and read.
- Use CRI 70+ for outdoor area lighting and industrial spaces where efficiency matters most.
Common mistakes
- Confusing CRI with color temperature. A 5000K light is not automatically high CRI.
- Mixing CRI levels in one space, which makes the same color look different under neighboring fixtures.
- Ignoring R9 where reds matter.
Frequently asked questions
Is CRI 80 good enough?
For most offices, schools, warehouses, and shops, yes.
What CRI is needed for an auto body shop?
90+ is recommended for paint and color matching. See our auto shop lighting guide.
Does higher CRI make a room look brighter?
Often, yes. Colors look more vivid, which people tend to perceive as brighter and clearer.
Related
Lumens, watts, and efficacy · Lighting glossary · Retail lighting layouts · Lighting for high-end businesses · Lighting resources